英文字典中文字典


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       







请输入英文单字，中文词皆可：


请选择你想看的字典辞典：
单词字典翻译
slugged查看　slugged　在百度字典中的解释百度英翻中〔查看〕
slugged查看　slugged　在Google字典中的解释Google英翻中〔查看〕
slugged查看　slugged　在Yahoo字典中的解释Yahoo英翻中〔查看〕

安装中文字典英文字典查询工具!


中文字典英文字典工具:
选择颜色:
输入中英文单字

































































英文字典中文字典相关资料:


  • Question on measuring bore diameter slugging the bore
    Question on measuring bore diameter slugging the bore I have slugged the bore on a few of my semi pistol barrels and this was my process 1- I removed the barrel to be slugged 2- I took an empty case for the proper caliber needing to be slugged and filled with molten lead then let cool 3- Removed the "slug" from the cse using a kinetic puller
  • Just slugged the bore on my Marlin 45 70 Microgroove - Cast Boolits
    Greetings all My first post on what looks to be a treasure trove of information I'm having some accuracy problems with my Marlin 1895 45 70 Microgroove barrel I've just slugged the bore using a plain lead 500 grain bullet It took some tapping through but seemed fine I'm guessing that the amount of force needed, reasonably strong but not overly so I felt The result was 458" 453" Does
  • My . 44-40 slugged to . 432. What mould can I use? - Cast Boolits
    I want to cast for an old BP Winchester in 44-40 It slugged to 432" but all 44-40 moulds I have seen have been 430" at the largest I looked at some at Buffalo Arms and Lee
  • Slugging a lever action? - Cast Boolits
    I've slugged single-shots, bolt-actions, and revolvers, but never a lever action I assume that I do it the same, but start from the muzzle? I'm concerned about this assumption in relation to damaging the crown Any instruction as to how to go about this? I need to slug a 30-30 Win 94AE Thanks! Selmerfan 01-24-2010,08:36 PM #2 duckndawg
  • . 001 or . 002 over slugged diameter? - Cast Boolits
    Thread: 001 or 002 over slugged diameter? Thread Tools 03-17-2021, 11:12 PM #1 mvintx
  • Has anyone ever slugged their XDm barrel? - Cast Boolits
    Has anyone ever slugged their XDm barrel? I slugged my 45ACP 4 5" Springfield Armory XDM barrel after getting some strange activity at the range
  • Cast Boolits
    Please note that if you are using a high risk VPN to register, your profile may be placed in a banned status If this is your first visit, be sure to check out the FAQ You will be required to register before you can post: click the register link above to proceed To start viewing messages, select the forum that you want to visit from the selection below The Swapin Sellin section is only
  • New to me Marlin 1894CL Ducks Unlimited . 25-20 | The High Road
    Now when I slugged the bore I did feel roughness and multiple tight spots but I think that may have been due to the lead bullet deforming as I tapped it down the bore I have also been doing online research on these Marlin CL series 25-20's and I have found instances of bore constrictions at the rear sight location and of oversize chambers
  • 45 chamber throats | The High Road
    I slugged it and found that the throats run 0 4495 to O 4505" Accuracy with factory duplication loads (255gr FN-cast) run 3-4" at 25yds Jacketed bullets shoot 2-2 5" (Hornady 250gr XTP) However, with 315gr WFN-GC over a very heavy charge of Alliant #2400 (as in a near 454 Casull loading), It shoots very, very well, indeed
  • IRA disarming | The High Road
    As much as I'd like to see the violence end in Northern Ireland, I'm a bit disturbed by this quote "An IRA statement came shortly after the leader of its political ally Sinn Fein said his party wanted to see all guns taken out of Irish society " Find it at





中文字典-英文字典  2005-2009